Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Red yellow white safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
The ,regulations, specify requirements regarding the use of ,safety helmets, on construction sites. It is the responsibility of the employer or self employed person to carry out a risk assessment and to supply a recommended ,helmet,.
Current approved ,safety, standards for ,helmets, As per the EA General ,Regulations,, Article 122.2: Dress and Salute, the following will apply: Except where Sport Rules allows otherwise, riders and drivers competing in an EA competition, must wear an approved ,helmet, with the chin strap fastened at all times.
7/11/2020, · Straps should be anti-concussion and width not less than 19 mm.Straps should be fitted such that ,minimum, clearance be at least 30 mm and maximum clearance more than 80 mm. Chin strap should have ,minimum, width of 19 mm and directly attached to shell. Nape strip should have ,minimum, depth of 115 mm. The mass of ,helmet, without attachments should be ...
The Trade Practices (Consumer Product ,Safety, Standards) ,Regulations, 2001—Bicycle ,Helmets, sets out the mandatory requirements for bicycle ,helmets,. This mandatory standard is based on certain sections of the voluntary Australian and New Zealand Standard, AS/NZS 2063:2008—Bicycle ,helmets,.
SAFETY, AND HYGIENE ,REGULATIONS, PPE: ,SAFETY HELMET, CODE SHR 102 Date: July 2003 Revision: 00 Page: 3 of 3 SELECTION: RECOMMENDATIONS 1. Before personal protection equipment is purchased, the table of risks should be completed to obtain more accurate criteria . 2.
Notes to the Trade Practices (Consumer Product ,Safety, Standard) (Bicycle ,Helmets,) ,Regulations, 2001. Note 1. The Trade Practices (Consumer Product ,Safety, Standard) (Bicycle ,Helmets,) ,Regulations, 2001 (in force under the Trade Practices Act 1974) as shown in this compilation comprise Statutory Rules 2001 No. 279 amended as indicated in the Tables ...
The DOI/USFS Aviation ,Helmets, Standard Specification will provide an avenue to allow non-military ,helmets, to be considered for acquisition within agencies. Manufacturers and distributors can test their ,helmets, using an ISO certified laboratory to the DOI/USFS Aviation ,Helmet, Standard.
The federal CPSC ,Safety, Standard for Bicycle ,Helmets, is mandatory for those ,helmets, indicated by CPSC. 1 A ,helmet, that complies with this standard is designed for use by infants and toddlers in activities involving non-motorized wheeled vehicles.. 2 A ,helmet, that complies with this standard is designed to withstand more than one moderate impact, but protection is provided for only a limited ...